LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2016 >> CX-9 Signature >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Power Systems >> Front Accessory Socket Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Front Accessory Socket Inspection

  1. Disconnect the negative battery terminal. (Refer to NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts.
    1. Passenger-side console side panel (Refer to CONSOLE SIDE PANEL REMOVAL/INSTALLATION .)
    2. Passenger-side side wall (Refer to SIDE WALL REMOVAL/INSTALLATION .)
    3. Front accessory socket (Refer to FRONT ACCESSORY SOCKET REMOVAL/INSTALLATION .)
  3. Connect the tester probe to the position shown in the figure and verify that there is continuity.
    Fig 1: Connecting Tester Probe To Front Accessory Socket
    G10950801Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals