LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2016 >> CX-9 Sport, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Air Fuel Ratio (A/F) Sensor Removal/Installation >> PCM Component Installation Note
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

PCM Component Installation Note

  1. Install the PCM component using the following procedure:
    1. Return the PCM component that was set aside to its original position.
    2. Temporarily tighten the bolt shown in the figure.
      Fig 1: Identifying PCM Component And Bolt
      G10947136Courtesy of MAZDA MOTORS CORP.
    3. Tighten the PCM component installation bolts in the order shown in the figure.
      Fig 2: PCM Component Installation Bolts Tightening Sequence
      G10947137Courtesy of MAZDA MOTORS CORP.

      Tightening torque 

      • 9-10 N.m {92-101 kgf.cm, 80-88 in.lbf}
    4. Install the wiring harness protector and connector.
      Fig 3: Installing Wiring Harness Protector And Connector
      G10947138Courtesy of MAZDA MOTORS CORP.
    5. Install the ground cable shown in the figure.
      Fig 4: Installing Ground Cable
      G10947139Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals