LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2016 >> CX-9 Touring, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Glass/Windows/Mirrors >> Windshield Removal >> Not Reusing Windshield
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Not Reusing Windshield

  1. Disconnect the negative battery terminal. Refer to NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Windshield wiper arm and blade Refer to WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION .)
    2. Cowl grille Refer to COWL GRILLE REMOVAL/INSTALLATION .)
    3. Front fender molding Refer to FRONT FENDER MOLDING REMOVAL/INSTALLATION .)
    4. A-pillar trim Refer to A-PILLAR TRIM REMOVAL/INSTALLATION .)
    5. Sunvisor Refer to SUNVISOR REMOVAL/INSTALLATION .)
    6. Front map light Refer to FRONT MAP LIGHT REMOVAL/INSTALLATION .)
    7. Assist handle Refer to ASSIST HANDLE REMOVAL/INSTALLATION .)
    8. Sensor cover Refer to SENSOR COVER REMOVAL/INSTALLATION .)
    9. Forward sensing camera (FSC) (with forward sensing camera (FSC)) Refer to FORWARD SENSING CAMERA (FSC) REMOVAL/INSTALLATION .)
    10. Forward sensing camera (FSC) cover (with forward sensing camera (FSC)) Refer to FORWARD SENSING CAMERA (FSC) COVER REMOVAL/INSTALLATION .)
    11. Forward sensing camera (FSC) clip (with forward sensing camera (FSC)) Refer to FORWARD SENSING CAMERA (FSC) CLIP REMOVAL/INSTALLATION .)
    12. Forward sensing camera (FSC) Short-cord (with forward sensing camera (FSC)) Refer to FORWARD SENSING CAMERA (FSC) SHORT-CORD REMOVAL/INSTALLATION .)
    13. Rain sensor (with auto light/wiper system) Refer to RAIN SENSOR REMOVAL/INSTALLATION .)
    14. Laser sensor (with smart city brake support (SCBS)) Refer to LASER SENSOR REMOVAL/INSTALLATION .)
    15. Rearview mirror (without auto-dimming rearview mirror) Refer to REARVIEW MIRROR REMOVAL/INSTALLATION .)
    16. Auto-dimming rearview mirror (with auto-dimming rearview mirror) Refer to AUTO-DIMMING REARVIEW MIRROR REMOVAL/INSTALLATION .)
  3. Set the headliner out of the way.
  4. Apply protective tape along the edge of the body.
    NOTE:
    • Overlap and adhere the protective tape to the corners to prevent damage.
    Fig 1: Applying Protective Tape Along Edge Of Body
    G10949520Courtesy of MAZDA MOTORS CORP.
  5. Remove the windshield molding by pulling it outward.
    NOTE:
    • If the windshield molding is difficult to remove, warm the windshield molding using a hot air blower.
    Fig 2: Removing Windshield Molding
    G10949521Courtesy of MAZDA MOTORS CORP.
  6. Cut out the sealant all around the glass using a sealant remover.
    Fig 3: Cutting Out Sealant Around Glass Using Sealant Remover
    G10949522Courtesy of MAZDA MOTORS CORP.
    NOTE:
    • If it is difficult to cut sealant, use piano wire and follow the procedure under "Reusing Windshield".
  7. Remove the windshield.
scientia non olet · About LEMON Manuals