Auto-open/close function for driver-side
- Disconnect the negative battery terminal. Refer to NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
- Remove the front door trim. (Passenger-side) Refer to FRONT DOOR TRIM REMOVAL/INSTALLATION .)
- Disconnect the front power window motor connector.
- Apply battery positive voltage and connect the ground to front power window motor terminals E and F, and then inspect the front power window motor operation.
B+ Terminal Ground Terminal Operation E F Close F E Open Courtesy of MAZDA MOTORS CORP.
- If the front power window motor does not operate as indicated in the table, replace it. Refer to FRONT POWER WINDOW MOTOR REMOVAL/INSTALLATION .)