Fuel Tank Installation Note

Install the following parts as a single unit:
- Fuel tank
- Insulator
- Fuel pump unit
- Pressure control valve (U.S.A. and CANADA specs.)
- Evaporative hose No. 2 (Except U.S.A. and CANADA specs.)
Temporarily tighten the bolt as shown in the figure.

Fig 1: Identifying Fuel Tank Bolt
Courtesy of MAZDA MOTORS CORP.
Tighten the bolt as shown in the figure.

Fig 2: Identifying Fuel Tank Bolt
Courtesy of MAZDA MOTORS CORP.

Tightening torque
- 22-30 N.m {2.3-3.0 kgf.m, 17-22 ft.lbf}
Tighten the bolt as shown in the figure.

Fig 3: Identifying Fuel Tank Bolts
Courtesy of MAZDA MOTORS CORP.

Tightening torque
- 22-30 N.m {2.3-3.0 kgf.m, 17-22 ft.lbf}