LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2017 >> 5 GT, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Accelerator Pedal Position (App) Sensor Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Accelerator Pedal Position (App) Sensor Inspection

NOTE:
  • The APP sensor cannot be removed as a single unit. When replacing the APP sensor, replace it together with the accelerator pedal as a single unit.
  1. Connect the M-MDS to the DLC-2.
  2. Switch the ignition to ON.
  3. Verify that the APP sensor output voltage (PID: APP1, APP2) increases according to the increase in the accelerator opening angle when the accelerator opening angle is gradually increased. (See ON-BOARD DIAGNOSTIC TEST .)
  4. Verify that the APP sensor output voltage (PID: APP1, APP2) is within the specification when the accelerator pedal is depressed and not depressed. (See ON-BOARD DIAGNOSTIC TEST .) (See PCM INSPECTION .)
scientia non olet · About LEMON Manuals