Diagnostic Procedure

TRAFFIC SIGN RECOGNITION SYSTEM (TSR) ITEM DOES NOT APPEAR IN PERSONALIZATION MENU [TRAFFIC SIGN RECOGNITION SYSTEM (TSR)] - DIAGNOSTIC PROCEDURE

Step	Inspection		Action
1	VERIFY DTCs Display the connectivity master unit and the forward sensing camera DTCs using the M-MDS. (See DTC INSPECTION [CONNECTIVITY MASTER UNIT] .) (See DTC INSPECTION [FORWARD SENSING CAMERA (FSC)] .) Is a DTC displayed?	Yes	Repair the malfunctioning location according to the applicable DTC troubleshooting. (See DTC TABLE [CONNECTIVITY MASTER UNIT] .) (See DTC TABLE [FORWARD SENSING CAMERA (FSC)] .)
1		No	Go to the next step.
2	VERIFY DRIVING CONDITION Ask the customer if the condition was any of the following conditions when the malfunction occurred. NAVI SD card is not inserted Is any of the above driving conditions met?	Yes	The vehicle is normal. (Explain to the customer that a traffic sign is not displayed because the operation of the traffic sign recognition system (TSR) is canceled or depending on the driving conditions.)
2		No	Go to the next step.
3	INSPECT ACTIVE DRIVING DISPLAY Inspect the active driving display. (See ACTIVE DRIVING DISPLAY INSPECTION .) Is the active driving display normal?	Yes	Go to the next step.
3		No	Replace the active driving display, then go to the next step. (See ACTIVE DRIVING DISPLAY REMOVAL/INSTALLATION .)
4	VERIFY MALFUNCTION SYMPTOM Has the malfunction symptom been eliminated?	Yes	Complete the symptom troubleshooting. (Explain repair contents to customer).
4		No	Repeat the diagnosis from Step 1. If the malfunction is not resolved, replace the forward sensing camera (FSC). (See FORWARD SENSING CAMERA (FSC) REMOVAL/INSTALLATION .)