LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2017 >> CX-3 Sport, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System (Service Information) >> TCS Off Switch Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

TCS Off Switch Inspection

  1. Remove the TCS OFF switch. (See TCS OFF SWITCH REMOVAL/INSTALLATION .)
  2. Verify that the resistance between the TCS OFF switch terminals B and C is as indicated in the table.
    • If not as indicated in the table, replace the TCS OFF switch.
    Fig 1: Checking Resistance Between TCS Off Switch Terminals B And C
    G09075258Courtesy of MAZDA MOTORS CORP.

    TCS OFF switch specification 

    Terminal Test condition Resistance (ohms)
    B-C Switch pressed 0
    Switch released 1139.99-1163.01
  3. Apply battery voltage to TCS OFF switch terminal J, and connect terminal I to ground.
  4. Verify that the LED illuminates.
    • If there is any malfunction, replace the TCS OFF switch.
scientia non olet · About LEMON Manuals