LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2017 >> CX-3 Touring, AWD >> Repair and Diagnosis >> Restraints >> Seat Belts >> Rear Buckle Removal/Installation >> Notes
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Rear Buckle Removal/Installation: Notes

  1. Switch the ignition off.
  2. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  3. Remove the rear seat cushion. (See REAR SEAT CUSHION REMOVAL/INSTALLATION .)
  4. Remove the bolts.
    Fig 1: Installing Rear Buckle (RH) And Rear Buckle (LH) Bolt
    G11437953Courtesy of MAZDA MOTORS CORP.
  5. Remove the rear buckle (RH) and rear buckle (LH).
  6. Install in the reverse order of removal. (See Rear Buckle Installation Note .)
scientia non olet · About LEMON Manuals