Oil Pressure Switch Installation Note

CAUTION:

Verify that there is no sealant between 1.7-2.7 mm {0.07-0.10 in} from the end of the oil pressure switch to prevent a possible operation malfunction.

When reusing the oil pressure switch, apply silicone sealant (TB1207B or equivalent) to the threads of the oil pressure switch.

Fig 1: Applying Silicone Sealant To Threads Of Oil Pressure Switch
Courtesy of MAZDA MOTORS CORP.
CAUTION:
- Install the oil pressure switch before the applied sealant starts to harden.
Install the oil pressure switch.
Tightening torque

12-17 N.m {123-173 kgf.cm, 107-150 in.lbf}