Transfer Oil Replacement

Replacement Part 

Oil and Chemical Type 

Transfer oil 

Type: MAZDA LONG LIFE HYPOID GEAR OIL SG1

1. Remove the front under cover No. 2. (See FRONT UNDER COVER No. 2 REMOVAL/INSTALLATION .)
2. Remove the drain plug with the washer.
   Fig 1: Removing Drain Plug With Washer

   Courtesy of MAZDA MOTORS CORP.
3. Drain the oil into a suitable container.
4. Tighten the drain plug with a new washer.
   Fig 2: Installing Drain Plug With Washer

   Courtesy of MAZDA MOTORS CORP.

   Tightening torque 

   40-58 N.m {4.1-5.9 kgf.m, 30-42 ft.lbf}

5. Remove the oil level plug with the washer and add the specified amount and type of oil through the oil level plug hole until the level reaches the bottom of the oil level plug hole.
   Fig 3: Removing Oil Level Plug With Washer

   Courtesy of MAZDA MOTORS CORP.

   Transfer oil type	Transfer oil capacity (approx. quantity)
   MAZDA LONG LIFE HYPOID GEAR OIL SG1	0.45 L {0.48 US qt, 0.40 Imp qt}

6. Tighten the oil level plug with a new washer.
   Fig 4: Installing Oil Level Plug With Washer

   Courtesy of MAZDA MOTORS CORP.

   Tightening torque 

   40-58 N.m {4.1-5.9 kgf.m, 30-42 ft.lbf}

7. Install the front under cover No. 2. (See FRONT UNDER COVER No. 2 REMOVAL/INSTALLATION .)