Setting method by operation of remote transmitter button
- The following setting can be changed by operation of the remote transmitter button.
Function Initial setting Setting content Control unit Keyless Lock Beep Volume. Medium High/Medium/Low/Off Start stop unit - Change the setting for the keyless beeper volume referring to the following procedure:
NOTE:
- If any of the following conditions is met during procedure, the setting for changing the keyless beeper volume is finished.
- The ignition is switched to ACC or ON (engine off or on).
- The driver's door is closed.
- The liftgate is open.
- The remote transmitter operation is not performed for approx. 10 s.
- The UNLOCK button on the remote transmitter is pressed.
- A request switch is pressed.
*1: If the keyless beeper volume is off, the beeper does not sound.