Setting method by operation of remote transmitter button
- The following setting can be changed by operation of the remote transmitter button.
| Function | Initial setting | Setting content | Control unit | ||
|---|---|---|---|---|---|
| 2-step unlocking function.(1) | ON | OFF/ON | Start stop unit | ||
|
|||||
- Change the setting for the 2-step unlocking function referring to the following procedure:NOTE:
- If any of the following conditions is met during procedure, the setting for changing the keyless beeper volume is finished.
- The ignition is switched to ACC or ON (engine off or on).
- The driver's door is closed.
- The liftgate is open.
- The remote transmitter operation is not performed for approx. 10 s.
- The lock button on the remote transmitter is pressed.
- A request switch is pressed.
- If any of the following conditions is met during procedure, the setting for changing the keyless beeper volume is finished.