LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2017 >> CX-9 Signature >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Control System - Auto A/C >> Ambient Temperature Sensor Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ambient Temperature Sensor Removal/Installation

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the seal board upper. (See SEAL BOARD UPPER REMOVAL/INSTALLATION .)
  3. Remove the front bumper. (See FRONT BUMPER REMOVAL .) (See FRONT BUMPER INSTALLATION .)
  4. Disconnect the connector.
    Fig 1: Ambient Temperature Sensor Connector Location
    G11433637Courtesy of MAZDA MOTORS CORP.
  5. Remove the clip.
    Fig 2: Removing Ambient Temperature Sensor Clip
    G11433638Courtesy of MAZDA MOTORS CORP.
  6. Remove the ambient temperature sensor.
  7. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals