Auto light system
Using M-MDS
- Connect the M-MDS to DLC-2.
- After the vehicle is identified, select the following items from the initial screen of the M-MDS.
- Select the "Module Programming".
- Select "Programmable Parameters".
- Select menu in the BCM.
- Select an item name, and then select option.
| M-MDS display | Function | Initial setting | Setting contents | Control unit |
|---|---|---|---|---|
| Auto Headlight On | Auto light sensitivity can be changed. | Standard (All Others) | Extra Low (Except Japan)/Low (All Others)/Standard (All Others)/High (Except Japan)/Extra High (Except Japan) | BCM |
Using center display
NOTE:
- When the system is set to [Extra High] or [High], each light turns on when the ambient light is brighter than when the system is set to [Standard] because the illumination level required to turn on the headlights LO, TNS and panel light increases. When the system is set to "Extra Low" or "Low", because the illumination level required to turn on the headlights LO, TNS and panel light decreases, each light turns on when the ambient light is darker than when the system is set to "Standard".
- The personalization feature may not be set correctly if [Jpan Only] such as [Extra High (Jpan Only)] is selected. Do not select [Jpan Only].