Diagnostic Procedure

Step	Inspection		Action
1	VERIFY INSTRUMENT CLUSTER DTCs Retrieve the instrument cluster DTCs using the M-MDS. (See DTC INSPECTION [INSTRUMENT CLUSTER] ). Are any DTCs displayed?	Yes	Repair or replace the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [INSTRUMENT CLUSTER] ).
1		No	Go to the next step.
2	INSTRUMENT CLUSTER CONFIGURATION DATA Using the M-MDS, perform the instrument cluster configuration with the As-Built data. (See INSTRUMENT CLUSTER CONFIGURATION (USING READ/WRITE FUNCTION) ). Clear the DTC for the retractable fastback control module using the M-MDS. (See CLEARING DTC [RETRACTABLE FASTBACK CONTROL MODULE] ). Switch the ignition ON (engine off or on) and wait for 30 s or more. Retrieve the retractable fastback control module DTCs using the M-MDS. (See DTC INSPECTION [RETRACTABLE FASTBACK CONTROL MODULE] ). Is the same DTC displayed?	Yes	Using the M-MDS, re-perform the instrument cluster configuration using the As-Built data, then go to the next step. (See INSTRUMENT CLUSTER CONFIGURATION (USING AS-BUILT DATA) ).
2		No	Go to Step 4.
3	VERIFY THAT REPAIRS HAVE BEEN COMPLETED Always reconnect all disconnected connectors. Connect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION ). Clear the DTC for the retractable fastback control module using the M-MDS. (See CLEARING DTC [RETRACTABLE FASTBACK CONTROL MODULE] ). Retrieve the retractable fastback control module DTCs using the M-MDS. (See DTC INSPECTION [RETRACTABLE FASTBACK CONTROL MODULE] ). Is the same DTC displayed?	Yes	Repeat the inspection from Step 1. If the malfunction recurs, replace the retractable fastback control module. (See RETRACTABLE FASTBACK CONTROL MODULE REMOVAL/INSTALLATION ). Go to the next step.
3		No	Go to the next step.
4	VERIFY IF OTHER DTCs DISPLAYED Are any other DTCs displayed?	Yes	Repair or replace the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [CONNECTIVITY MASTER UNIT] ).
4		No	DTC troubleshooting completed.