PID/Data Monitor Table [Blind Spot Monitoring (BSM) Control Module]

-: Not applicable

PID name	Unit/Status	Data contents	Module control terminal
Buzzer	Off/On	Off: Blind spot monitoring (BSM) warning buzzer does not sound. On: Blind spot monitoring (BSM) warning buzzer sounds.	D (MS-CAN_H) E (MS-CAN_L)
INTNL_TMP_L	°C, °F	Displays Blind spot monitoring (BSM) control module (LH) internal temperature.	-
INTNL_TMP_R	°C, °F	Displays Blind spot monitoring (BSM) control module (RH) internal temperature.	G (Local CAN_H) J (Local CAN_L)
MAIN_SW	Off/On	Off: Blind spot monitoring (BSM) switch not pressed On: Blind spot monitoring (BSM) switch pressed	D (MS-CAN_H) E (MS-CAN_L)
OP_BRT_L	-	Displays the Blind spot monitoring (BSM) warning light (LH) output brightness.	-
OP_BRT_R	-	Displays the Blind spot monitoring (BSM) warning light (RH) output brightness.	G (Local CAN_H) J (Local CAN_L)
SYSTEM_ST	Off/Passive_On/Active_On/Failure	Off: Blind spot monitoring (BSM) system does not operate. Passive_On: Blind spot monitoring (BSM) system is on standby. Active_On: Blind spot monitoring (BSM) system operates. Failure: Blind spot monitoring (BSM) system malfunction.	-
TURN_SW_L	Off/On	Off: Turn switch is in position other than LH. On: Turn switch is in LH position.	D (MS-CAN_H) E (MS-CAN_L)
TURN_SW_R	Off/On	Off: Turn switch is in position other than RH. On: Turn switch is in RH position.	D (MS-CAN_H) E (MS-CAN_L)
VPWR_L	V	Displays Blind spot monitoring (BSM) control module (LH) power supply voltage.	I (Power position (IG1))
VPWR_R	V	Displays Blind spot monitoring (BSM) control module (RH) power supply voltage.	G (Local CAN_H) J (Local CAN_L)
VSPD	KPH, MPH	Displays the vehicle speed.	D (MS-CAN_H) E (MS-CAN_L)
WRN_IND_L	Off/On	On: Blind spot monitoring (BSM) warning indicator light (LH) turns off. Off: Blind spot monitoring(BSM) warning indicator light (LH) turns on.	G (Local CAN_H) J (Local CAN_L)
WRN_IND_R	Off/On	On: Blind spot monitoring (BSM) warning indicator light (RH) turns off. Off: Blind spot monitoring (BSM) warning indicator light (RH) turns on.	G (Local CAN_H) J (Local CAN_L)
YAW_RATE	°/s	0°/s: Vehicle is stopped or while moving straight ahead. Exceeds 0°/s: Vehicle tilted left. Less than 0°/s: Vehicle tilted right.	D (MS-CAN_H) E (MS-CAN_L)