LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2019 >> 6 Signature >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Control System - Auto A/C >> Passenger Compartment Temperature Sensor Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Passenger Compartment Temperature Sensor Removal/Installation

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
    2. Front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
    3. Hood release lever (See HOOD LATCH AND RELEASE LEVER REMOVAL/INSTALLATION .)
    4. Fuel-filler lid opener lever (See FUEL-FILLER LID OPENER AND LEVER REMOVAL/INSTALLATION .)
    5. Driver-side decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION .)
    6. Driver-side lower panel (See LOWER PANEL REMOVAL/INSTALLATION .)
    7. Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION .)
    8. Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION .)
    9. Passenger-side decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION .)
    10. Passenger-side lower panel (See LOWER PANEL REMOVAL/INSTALLATION .)
    11. Side wall (See SIDE WALL REMOVAL/INSTALLATION .)
    12. Selector lever knob (ATX) (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION .)
    13. Shift lever knob (MTX)
    14. Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION .)
    15. Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION .)
    16. Rear console component (See REAR CONSOLE REMOVAL/INSTALLATION .)
    17. Center lower panel (See LOWER PANEL REMOVAL/INSTALLATION .)
  3. Disconnect the connector.
    Fig 1: Disconnecting Passenger Compartment Temperature Sensor Connector
    G12233657Courtesy of MAZDA MOTORS CORP.
  4. Disconnect the aspirator from the passenger compartment temperature sensor.
  5. Remove the screw.
    Fig 2: Disconnecting Aspirator From Passenger Compartment Temperature Sensor
    G12233658Courtesy of MAZDA MOTORS CORP.
  6. Remove the passenger compartment temperature sensor.
    Fig 3: Passenger Compartment Temperature Sensor
    G12233659Courtesy of MAZDA MOTORS CORP.
  7. Remove the aspirator.
    Fig 4: Aspirator
    G12233660Courtesy of MAZDA MOTORS CORP.
  8. Install in the reverse order of removal.