LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2020 >> 6 Signature >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Front Shock Absorber And Coil Spring Disassembly/Assembly >> Mounting Rubber Installation Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Mounting Rubber Installation Note

  1. Install the mounting rubber so that the mounting rubber stud and the front shock absorber bracket are in position A shown in the following figure below.
    Fig 1: Mounting Rubber Stud And Shock Absorber Bracket Mounting Position
    G09074667Courtesy of MAZDA MOTORS CORP.

    A: 0°±5° 

scientia non olet · About LEMON Manuals