LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2020 >> CX-5 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 285 (Glass/Windows/Mirrors) >> Power Window Regulator Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Window Regulator Removal/Installation

WARNING: This page is about a different car, the 2020 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform the door glass preparation. (See DOOR GLASS REMOVAL/INSTALLATION .)
  2. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  3. Remove the following parts:
    1. Door trim (See DOOR TRIM REMOVAL/INSTALLATION .)
    2. Door module panel (See DOOR MODULE PANEL REMOVAL/INSTALLATION .)
    3. Door glass (See DOOR GLASS REMOVAL/INSTALLATION .)
  4. Disconnect the connector.
    G11275142Courtesy of MAZDA MOTORS CORP.
  5. Remove nuts (1).
    Fig 1: Power Window Regulator Nuts With Torque Specification
    G11275143Courtesy of MAZDA MOTORS CORP.
  6. Remove nuts (2).
  7. Remove the power window regulator through the door module panel installation hole.
  8. Install in the reverse order of removal.
  9. Perform the power window system initial setting. (See POWER WINDOW SYSTEM INITIALIZATION PROCEDURE .)
scientia non olet · About LEMON Manuals