LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2020 >> CX-5 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 320 (Wheel Alignment) >> Rear Wheel Alignment >> Specification (Unloaded Condition)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Specification (Unloaded Condition)

WARNING: This page is about a different car, the 2020 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
Item Specification
Total toe-in Tire [Tolerance ±4 {0.2}] (mm {IN}) 3.0 {0.12}
Rim inner [Tolerance ±2.8 {0.11}] Vehicle equipped with 16 inch wheel: 2.0 {0.079}
Vehicle equipped with 17 inch wheel: 2.1 {0.083}
  degree 0°17'±10'
Camber
[Tolerance ±1°
Vehicle height: From the end of the rear fender to the center of the wheel (mm {IN}) 350-358 {13.8-14.0} -1°23'
359-367 {14.2-14.4} -1°09'
368-376 {14.5-14.8} -0°57'
377-385 {14.9-15.1} -0°46'
386-394 {15.2-15.5} -0°37'
NOTE:
  • Unloaded condition: Fuel tank is full. Engine coolant and engine oil are at specified level. Jack and tools are in designated position.
  • Difference between the left and right camber angle must be within 1°.