LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2022 >> 3 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (On-Board Diagnostic - Vehicle Control Module (2 Of 2)) >> DTC U2505-82: Error Signal Received From Driver Monitoring Camera Unit [Vehicle Control Module] >> Outline
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC U2505-82: Error Signal Received From Driver Monitoring Camera Unit [Vehicle Control Module]: Outline

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
DTC U2505:82 [VEHICLE CONTROL MODULE] DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location Error signal received from driver monitoring camera unit
Detection condition
  • The vehicle control module (VCM) receives a driver monitoring camera unit error signal for 10 s.
Fail-safe (See DTC TABLE [VEHICLE CONTROL MODULE (US)] .)
Possible cause
  • Driver monitoring camera unit malfunction
  • Vehicle control module (VCM) malfunction (built into body control module (BCM))
System wiring diagram Not applicable
Connector diagram Not applicable