October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
PID/DATA Monitor Inspection
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off).
- Verify that the clutch pedal position (PID: CPP) input from the clutch stroke sensor is within the standard when the clutch pedal is depressed. (See ON-BOARD DIAGNOSTIC TEST
.) (See PCM INSPECTION .)
- If not within the specification, replace the clutch master cylinder. (See
CLUTCH MASTER CYLINDER REMOVAL/INSTALLATION [C66M-R].)