DTC U2300-55: Instrument Cluster Configuration Not Implemented [Auto Leveling Control Module]: Notes

Description	Instrument cluster configuration not implemented
Detection condition	The auto leveling control module received a signal which indicates the instrument cluster configuration is not performed.
Fail-safe	The headlight leveling actuator is stopped at the position when the malfunction is determined.
POSSIBLE CAUSE	NOTE: To correctly write the configuration data sent from the instrument cluster to the auto leveling control module to the auto leveling control module, 30 s or more need to have elapsed since the ignition was switched ON (engine off or on). Instrument cluster configuration is not completed. Instrument cluster malfunction Auto leveling control module malfunction
System wiring diagram	Not applicable