Blind Spot Monitoring (BSM) Control Module DTCS
BLIND SPOT MONITORING (BSM) CONTROL MODULE DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION
| DTC No. | Refer to |
|---|---|
| B11CB-11 | BLIND SPOT MONITORING (BSM) WARNING LIGHT (RH) CIRCUIT MALFUNCTION [BLIND SPOT MONITORING (BSM) CONTROL MODULE] |
| B11CB-15 | BLIND SPOT MONITORING (BSM) WARNING LIGHT (RH) CIRCUIT MALFUNCTION [BLIND SPOT MONITORING (BSM) CONTROL MODULE] |
| B11D3-11 | BLIND SPOT MONITORING (BSM) WARNING LIGHT (LH) CIRCUIT MALFUNCTION [BLIND SPOT MONITORING (BSM) CONTROL MODULE] |
| B11D3-15 | BLIND SPOT MONITORING (BSM) WARNING LIGHT (LH) CIRCUIT MALFUNCTION [BLIND SPOT MONITORING (BSM) CONTROL MODULE] |
| U0001-88 | COMMUNICATION ERROR [BLIND SPOT MONITORING (BSM) CONTROL MODULE] |
| U0028-87 | BLIND SPOT MONITORING (BSM) CONTROL MODULE (LH) AND (RH) COMMUNICATION ERROR [BLIND SPOT MONITORING (BSM) CONTROL MODULE] |
| U0401-68 | ERROR SIGNAL RECEIVED FROM PCM [BLIND SPOT MONITORING (BSM) CONTROL MODULE] |
| U0415-68 | ERROR SIGNAL RECEIVED FROM DSC HU/CM [BLIND SPOT MONITORING (BSM) CONTROL MODULE] |
| U0423-68 | ERROR SIGNAL RECEIVED FROM INSTRUMENT CLUSTER [BLIND SPOT MONITORING (BSM) CONTROL MODULE] |
| U0515-68 | ERROR SIGNAL RECEIVED FROM START STOP UNIT [BLIND SPOT MONITORING (BSM) CONTROL MODULE] |
| U1A4B-16 | BLIND SPOT MONITORING (BSM) CONTROL MODULE (RH) LOW POWER SUPPLY VOLTAGE INPUT [BLIND SPOT MONITORING (BSM) CONTROL MODULE] |
| U1A4B-17 | BLIND SPOT MONITORING (BSM) CONTROL MODULE (RH) HIGH POWER SUPPLY VOLTAGE INPUT [BLIND SPOT MONITORING (BSM) CONTROL MODULE] |
| U1A4B-43 | BLIND SPOT MONITORING (BSM) CONTROL MODULE (RH) MALFUNCTION [BLIND SPOT MONITORING (BSM) CONTROL MODULE] |
| U1A4B-54 | RADAR AIMING IS NOT PERFORMED OR RADAR SENSOR AXIS IS DEVIATED (BLIND SPOT MONITORING (BSM) CONTROL MODULE (RH)) [BLIND SPOT MONITORING (BSM) CONTROL MODULE] |
| U1A4B-97 | RADAR SENSOR SENSITIVITY TEMPORARILY DECREASES DEPENDING ON VARIOUS EXTERNAL AND ENVIRONMENTAL FACTORS (BLIND SPOT MONITORING (BSM) CONTROL MODULE (RH)) [BLIND SPOT MONITORING (BSM) CONTROL MODULE] |
| U2300-54 | CONFIGURATION DATA NOT RECEIVED FROM INSTRUMENT CLUSTER [BLIND SPOT MONITORING (BSM) CONTROL MODULE] |
| U2300-55 | INSTRUMENT CLUSTER CONFIGURATION NOT IMPLEMENTED [BLIND SPOT MONITORING (BSM) CONTROL MODULE] |
| U2300-56 | CONFIGURATION DATA UNMATCHED WITH INSTRUMENT CLUSTER [BLIND SPOT MONITORING (BSM) CONTROL MODULE] |
| U2300-64 | INSTRUMENT CLUSTER CONFIGURATION ERROR [BLIND SPOT MONITORING (BSM) CONTROL MODULE] |
| U3000-42 | BLIND SPOT MONITORING (BSM) CONTROL MODULE (LH) MALFUNCTION [BLIND SPOT MONITORING (BSM) CONTROL MODULE] |
| U3000-4B | TEMPERATURE TEMPORARILY INCREASES DEPENDING ON VARIOUS EXTERNAL AND ENVIRONMENTAL FACTORS (BLIND SPOT MONITORING (BSM) CONTROL MODULE (LH) OR (RH)) [BLIND SPOT MONITORING (BSM) CONTROL MODULE] |
| U3000-54 | RADAR AIMING IS NOT PERFORMED OR RADAR SENSOR AXIS IS DEVIATED (BLIND SPOT MONITORING (BSM) CONTROL MODULE (LH)) [BLIND SPOT MONITORING (BSM) CONTROL MODULE] |
| U3000-97 | RADAR SENSOR SENSITIVITY TEMPORARILY DECREASES DEPENDING ON VARIOUS EXTERNAL AND ENVIRONMENTAL FACTORS (BLIND SPOT MONITORING (BSM) CONTROL MODULE (LH)) [BLIND SPOT MONITORING (BSM) CONTROL MODULE] |
| U3003-16 | BLIND SPOT MONITORING (BSM) CONTROL MODULE (LH) LOW POWER SUPPLY VOLTAGE INPUT [BLIND SPOT MONITORING (BSM) CONTROL MODULE] |
| U3003-17 | BLIND SPOT MONITORING (BSM) CONTROL MODULE (LH) HIGH POWER SUPPLY VOLTAGE INPUT [BLIND SPOT MONITORING (BSM) CONTROL MODULE] |