DTC C1A67-76: Front Radar Sensor Aiming Error

C1A67-76: (VCM) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Front radar sensor aiming error
Detection condition	The vehicle control module (VCM) detects that the aiming adjustment is failed while the front radar sensor aiming adjustment is implemented.
Fail-safe	(See DTC TABLE [VCM] .)
Possible cause	Internal malfunction related DTCs are stored in the following modules. Vehicle control module (VCM) (See DTC TABLE [VCM] .) Body control module (BCM) (See DTC TABLE [BCM] .) DTCs are stored in the front radar sensor. (See DTC TABLE [FR] .) Front radar sensor aiming adjustment malfunction (aiming adjustment error) (See FRONT RADAR SENSOR AIMING .) Front radar sensor malfunction (Refer to FRONT RADAR SENSOR REMOVAL/INSTALLATION in service information.) Vehicle control module (VCM) malfunction (built into body control module (BCM)) (Refer to BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION in service information.)
Repeatability verification procedure	Clear the DTC recorded in the memory. (See CLEARING DTC .)
System wiring diagram	Not applicable