Function Inspection

Connect the M-MDS to the DLC-2.
Switch the ignition ON (engine off).
Display the PCM PIDs [APP1] and [APP2]. (Refer to [PID/DATA MONITOR INSPECTION ] in the troubleshooting information.) (Refer to [PID/DATA MONITOR TABLE [PCM (SKYACTIV-G 2.5T)] ] in the troubleshooting information.)

Compare the voltage and opening angle indications for the PIDs [APP1] and [APP2] with the standard in the table indicated below.

If they do not match the standard, perform the voltage inspection. (See VOLTAGE INSPECTION .)

ACCELERATOR PEDAL POSITION SENSOR SPECIFICATIONS (STANDARD)

Condition	APP1		APP2
Condition	V	%	V	%
Accelerator pedal released	Approx. 0.75	Approx. 15	Approx. 2.26	Approx. 45.49
Accelerator pedal depressed	Approx. 4.52	Approx. 90.58	Approx. 0.38	Approx. 7.45