LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2024 >> 3 Premium >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> On-Board Diagnostic (4 Of 6) (VIN Y) >> DTC P064D-00: Internal Control Module A/F Sensor Processor Performance Problem >> Troubleshooting Diagnostic Procedure >> Intention of troubleshooting procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Intention of troubleshooting procedure

P064D-00: (PCM - SKYACTIV-G 2.5T) TROUBLESHOOTING DIAGNOSTIC PROCEDURE

Step Inspection Results Action
1 PURPOSE: PERFORM DTC INSPECTION AND VERIFY IF MALFUNCTIONING PART IS PCM 
  • Clear the DTC recorded in the memory. (See CLEARING DTC .)
  • Replicate the vehicle conditions at the time the DTC was detected using the following procedure.
  • Perform the DTC inspection for the PCM. (See DTC INSPECTION .)
  • Is the same Pending DTC present?
 Yes Refer to the controller area network (CAN) malfunction diagnosis flow to inspect for a CAN communication error.
(See MALFUNCTION DIAGNOSIS FLOW [CONTROLLER AREA NETWORK (CAN)] .)
If the CAN communication is normal, replace the PCM and perform the repair completion verification 1.
(Refer to PCM REMOVAL/INSTALLATION in service information.)
No Go to the next step.
Repair completion verification 1 PURPOSE: VERIFY IF OTHER DTCs DISPLAYED 
  • Perform the DTC inspection. (See DTC INSPECTION .)
  • Are any other DTCs displayed?
 Yes Repair or replace the malfunctioning location according to the applicable DTC troubleshooting.
No DTC troubleshooting completed.
scientia non olet · About LEMON Manuals