Vehicle Without Emergency Call System

B1207-86: (BCM) DETECTION CONDITION AND POSSIBLE CAUSE (VEHICLE WITHOUT EMERGENCY CALL SYSTEM)

System malfunction location	Error signal received from SAS control module
Detection condition	The door-electrical supply unit (driver's side) receives the error signals from the SAS control module.
Fail-safe	Not applicable
Possible cause	DTCs are stored in the SAS control module. (See DTC TABLE [SAS] .) Malfunction in wiring harness (including connector/terminal) between door-electrical supply unit (driver's side) and SAS control module (See CIRCUIT INSPECTION .) (See CONNECTOR INSPECTION .) SAS control module malfunction (Refer to SAS CONTROL MODULE REMOVAL/INSTALLATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM - US/CANADA/ISRAEL SPEC.] in service information.) Door-electrical supply unit (driver's side) malfunction (Refer to DOOR-ELECTRICAL SUPPLY UNIT REMOVAL/INSTALLATION in service information.) Body control module (BCM) malfunction (Refer to BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION in service information.)
Repeatability verification procedure	Clear the DTC recorded in the memory. (See CLEARING DTC .)
Courtesy of MAZDA MOTORS CORP.
1	Door-electrical supply unit (driver's side)
2	SAS control module