360°View Monitor Control Module Inspection
NOTE:
- The integrity of the 360° view monitor control module cannot be determined from a single part. When inspecting the 360° view monitor control module, perform the following procedure.
- Connect the M-MDS to the DLC-2.
- Perform the DTC inspection for the 360° view monitor control module and verify if any DTCs related to the 360° view monitor control module is detected. (Refer to
DTC INSPECTION
in the service information)
- If DTCs are detected, repair the malfunctioning location according to the applicable DTC troubleshooting. (Refer to [DTC TABLE [VMC] ] in the service information)