DTC U250-41: Error Signal Received From Vehicle Control Module (VCM) (BCM)

U2501: 41 (BCM) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Error signal received from vehicle control module (VCM)
Detection condition	The body control module (BCM) received CAN error signal from the vehicle control module (VCM).
Fail-safe	Not applicable
Possible cause	DTCs are stored in the vehicle control module (VCM). (See DTC TABLE [VCM] .) Body control module (BCM) malfunction (Refer to applicable BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION in the service information.)
Repeatability verification procedure	Clear the DTC recorded in the memory. (see CLEARING DTC .)
System wiring diagram	Not applicable