LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different car >> Section 154 (Dynamic Stability Control - Service Information) >> DSC HU/Cm Inspection >> Notes
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DSC HU/Cm Inspection: Notes

WARNING: This page is about a different car, the 2025 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the DSC HU/CM connector. (See DSC HU/CM REMOVAL/INSTALLATION [VIN L (WITHOUT CYLINDER DEACTIVATION)] .) (See DSC HU/CM REMOVAL/INSTALLATION [VIN M (WITH CYLINDER DEACTIVATION)] .) (See DSC HU/CM REMOVAL/INSTALLATION [VIN Y] .)
  2. Connect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  3. Attach the tester lead to the DSC HU/CM wiring harness-side connector and inspect voltage, continuity, or resistance according to the standard (reference) on the table.
scientia non olet · About LEMON Manuals