Bluetooth® PAIRING PROCEDURE: Introduction
WARNING: This page is about a different car, the 2025 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
- The Bluetooth® pairing procedure differs depending on the version of the Bluetooth® -enabled device. Ask the customer in advance what the Bluetooth® -enabled device's version was when the Bluetooth® pairing was performed.
NOTE:
- A maximum of seven Bluetooth®-enabled devices can be programmed to one vehicle. If Bluetooth-enabled device is version 2.1 and later
- Switch the ignition ON (engine off or on).
- Select "Settings" from the home screen of the center display as shown in the figure below.
- Select the following on the center display.
- [Devices]
- [Bluetooth]
- Bluetooth setting ON
- [Add New Device]
- Verify the 6-digit code displayed in the center display and the Bluetooth-enabled device.NOTE:
- When "Add New Device" is selected, the CMU searches for a Bluetooth® -enabled device. If the CMU detects a Bluetooth® -enabled device, a 6-digit code is displayed in the center display.
- Select [YES] on the center display.NOTE:
- When "YES" is selected, the CMU initiates the pairing programming with the Bluetooth® -enabled device.
- Connection permission and permission to access the contact list may be necessary depending on the Bluetooth® -enabled device.
- Verify that "Pairing complete Connection complete" is indicated in the center display.