Selection switch indicator
WARNING: This page is about a different car, the 2024 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
- Perform the following procedure.
- Left selection switch indicator: Apply battery positive voltage to power window main switch terminal L, and connect terminal P to ground.
- Right selection switch indicator: Apply battery positive voltage to power window main switch terminal I, and connect terminal P to ground.
- Verify that the LED is turned on.
- If the LED does not turn on, replace the power window main switch. (See POWER WINDOW MAIN SWITCH REMOVAL/INSTALLATION .)