LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2024 >> MX-5 Miata RF Club >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Power Window Regulator Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Window Regulator Removal/Installation

  1. Perform the door glass preparation. (See DOOR GLASS REMOVAL/INSTALLATION .)
  2. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  3. Remove the following parts:
    1. Door trim (See DOOR TRIM REMOVAL/INSTALLATION .)
    2. Door module panel (See DOOR MODULE PANEL REMOVAL/INSTALLATION .)
    3. Door glass (See DOOR GLASS REMOVAL/INSTALLATION .)
  4. Disconnect the connector.
    G14595392Courtesy of MAZDA MOTORS CORP.
  5. Remove nuts (1).
    Fig 1: Power Window Regulator, Door Module Panel Installation Hole And Nuts With Torque Specifications
    G14595393Courtesy of MAZDA MOTORS CORP.
  6. Remove nuts (2).
  7. Remove the power window regulator through the door module panel installation hole.
  8. Install in the reverse order of removal.
  9. Perform the power window system initial setting. (See POWER WINDOW SYSTEM INITIALIZATION PROCEDURE .)
scientia non olet · About LEMON Manuals