LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 2009 >> CLS63 >> Repair and Diagnosis >> General Information >> Reset Procedures >> ATEQ TPMS Reset Procedure >> ATEQ TPMS Reset Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ATEQ TPMS Reset Procedure

NOTE: Whenever tire pressure has been adjusted, or when wheels or tires have been replaced, the TPMS must be reactivated before it can work.
  1. Ensure inflation pressure of all 4 tires is set to specification.
  2. Switch ignition ON. Press the next menu or previous menu button on the multifunction steering wheel repeatedly until the standard display menu appears in the multifunction display.
  3. Press the up or down arrow button repeatedly until the following message appears in the multifunction display: "TIRE PRESSURE MONITOR ACTIVE MENU: R-BUTTON ".
  4. Press the reset button The following message appears in the multifunction display: "RESTART TIRE PRESSURE MONITOR? CANCEL or YES".
  5. Press the up or down arrow button to select YES.
  6. Press the "+" button. The following message will appear in the multifunction display: "TIRE PRESSURE MONITOR RESTARTED".
  7. After driving a few minutes, the current tire inflation pressure values are accepted as reference pressures and then monitored. If you wish to cancel activation, press the up or down arrow button to select CANCEL, then press the "+" button.
scientia non olet · About LEMON Manuals