LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 2017 >> E43 AMG >> Repair and Diagnosis >> Quick Lookups >> Technical Bulletins >> Campaigns >> Restraints Control Systems >> Recall Campaign 2017030014 - Update SRS Control Module Software (2017030014)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Recall Campaign 2017030014 - Update SRS Control Module Software (2017030014)

Publication date: 2017-04-01
Reference number: 2017030014

RECALL CAMPAIGN 2017030014 - UPDATE SRS CONTROL MODULE SOFTWARE

RECALL CAMPAIGN 2017030014 - UPDATE SRS CONTROL MODULE SOFTWARE

SERVICE CAMPAIGN BULLETIN

Reference Number(s): 2017030014, Date of Issue:  April 2017
MERCEDES-BENZ: Model 213, Model Year 2017

SUBJECT

Model 213, Model Year 2017 

Update SRS Control Module Software 

Daimler AG ('DAG'), the manufacturer of Mercedes-Benz vehicles, has determined that on certain E-Class vehicles (213 platform) in the US, the parameter setting for the airbag control module might prevent the vehicles from being in compliance with Federal Motor Vehicle Safety Standard (FMVSS) number 208 (Occupant Crash Protection). An authorized Mercedes-Benz dealer will update the airbag control module on the affected vehicles.

Prior to performing this Recall Campaign:

Please note that Recall Campaigns do not expire  and may also be performed on a vehicle with a vehicle status indicator.

Approximately 65 vehicles are involved.

PROCEDURE

NOTE:
  • Use DAS/Xentry 03-04/17 with all associated patches or higher.
  • Follow the steps exactly as described in DAS/Xentry.
  • Connect battery charger (battery voltage >12.5V).
  • Ensure all electrical consumers are switched-off.
  • In the event of software/SCN update issues, contact Star Diagnosis User Help Desk. Please refer to the "pre-call" check list before contacting UHD
  • Refer to Star Diagnosis System (SDS) Best Practices Guide.
  1. Update software for Supplemental Restraint System (SRS) control module: Control units view Body SRS Supplemental Restraint System Adaptations Control unit update Control unit commissioning Commissioning of already installed control unit.
  2. Follow on-screen instructions.
NOTE: The following allowable labor operation should be used when submitting a warranty claim for this repair:

WARRANTY INFORMATION

Operation

  1. Connect/disconnect battery charger (02-5058)
  2. Star Diagnosis System (SDS), Connect/disconnect (02-4762)
  3. Update SRS control module software (02-9334).
WARRANTY INFORMATION

Damage Code Operation Number Labor Time (hrs.)
82 941 38 8 02-5058 0.1
02-4762 0.1
02-9334 0.1
NOTE: Operation Number labor times are subject to change