All Models
Position wheels in straight-ahead position and loosen tie rod end lock nut and clips securing bellows. To adjust toe-in, rotate tie rods until specifications are within limits. Tighten lock nuts and secure clips. Tie rods lengths should be equal within 1/4".
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Caster (Degrees) | Camber (Degrees) | Toe-In (Inches) | Toe-Out On Turns (Degrees) | |
|---|---|---|---|---|---|
| Inner | Outer | ||||
| Capri | 1 5/8 ± 5/8 | 1 1/2 ± 3/4 | 0 to 1/4 | 20 | 18 1/4 to 19 3/4 |