LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 1992 >> Capri Base, Standard >> Repair and Diagnosis >> Electrical >> Starter >> Bench Testing >> Brush & Spring Test
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Brush & Spring Test

  1. Connect ohmmeter between positive brush holder and negative brush holder. If ohmmeter indicates continuity, brush holder assembly is shorted and must be replaced.
  2. Check brush length. See STARTER MOTOR SPECIFICATIONS  table. If brush length is less than specification, replace brushes.
  3. Check spring tension. Spring tension should be 2.0-4.3 lbs. (.91-1.95 kg). Ensure brushes move freely in holders.
scientia non olet · About LEMON Manuals