LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 1993 >> Capri Base, Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel >> Testing >> Temperature Gauge Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Temperature Gauge Test

  1. Remove electrical connector from temperature sending unit located at front of cylinder head. Connect one lead of Rotunda Gauge System Tester (021-00055) to connector and other tester lead to ground. Set tester to 18 ohms, turn ignition switch on and observe temperature gauge. Gauge should read 250°F.
  2. Turn tester to 60 ohms. Gauge should read 175°F. Turn tester to 223 ohms. Gauge should read 100°F. If all readings are within twice needle width of correct reading, gauge is functioning properly. If readings are not as specified, replace gauge.
scientia non olet · About LEMON Manuals