Section 230 (Cruise Control Systems): Servo: Installation
WARNING: This page is about a different car, the 2002 Dodge Grand Caravan, 2002 Dodge Caravan, 2002 Chrysler Voyager, and 2002 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
Transfer speed control cable to replacement speed control servo.
- Install retaining clip to cable at servo.
- Install 2 nuts at cable to servo and servo bracket, tighten to 7 N.m (60 ins. lbs.).
- Connect electrical connector to servo.
- Connect vacuum line to speed control servo that leads to the battery tray/vacuum reservoir.
- Install speed control servo and bracket.
- Install battery tray/vacuum reservoir, refer to the BATTERY for more information.
- Install speed control and throttle cable casing to cable mount bracket.
- Connect the throttle and speed control cable ends to throttle body.
- Connect the negative battery cable.