LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 1993 >> Villager LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 318 (Controls) >> A/C Heater Control >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

A/C Heater Control: Installation

WARNING: This page is about a different car, the 2004 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. If removed, install the two mounting brackets to the A/C-heater control.
  2. Connect the two wire harness connectors into the back of the A/C-heater control.
  3. Connect the two control cables to the A/C-heater control.
    NOTE: Install the control cable of bottom adjustment lever to the front adjustment wheel of the A/C-heater control.
  4. Position the A/C-heater control into the instrument panel.
  5. Install the two A/C-heater control retaining screws. Tighten the screws to 2 N.m (17 in. lbs.).
  6. Install the center bezel onto the instrument panel (Refer to INSTALLATION ).
  7. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals