October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Fuel Pump Relay

Remove fuel pump relay, located below center of instrument panel, under PCM. Continuity should not exist between terminals "A" and "C". See Fig 1 . Using fused jumper wires, apply 12 volts to relay terminals "B" and "C". Continuity should exist between terminals "A" and "C". Replace relay if operation is not as specified.

Fig 1: Identifying Fuel Pump Relay Terminals

Courtesy of FORD MOTOR CO.