LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 1994 >> Villager GS, Van Cargo >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Self-Diagnostic System >> Clearing Codes >> Jumper Wire Method
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Jumper Wire Method

Activate Diagnostic Test Mode. Disconnect diagnostic connector. Attach jumper wire to Blue/White and Grey/Blue terminals of diagnostic connector. See Figure . Wait 2 seconds. Remove jumper wire and reconnect diagnostic connector. MIL (CHECK ENGINE light) will stay ON and codes will be erased.

scientia non olet · About LEMON Manuals