With Automatic Temperature Control

REMOVAL
1. Remove the instrument panel, refer to Body and Frame/Interior Trim/ Dash Board/Service and Repair/ Service and Repair
2. Remove the A/C evaporator housing assembly, please refer to Heating and Air Conditioning/Evaporator Case/Service and Repair/ Service and Repair

Fig 26 Vacuum Line Removal From Heater Core Seal:

3. Remove the vacuum source line from the heater dash panel seal.

Heater And Evaporator Case Removal And Installation:

4. Remove the seal from the heater core tubes.

A/C Electronic Door Actuator Motor:

5. Remove the A/C electronic door actuator motor to the A/C evaporator housing.

Heater Core Cover Removal And Installation:

6. Remove the four heater core cover retaining screws, and remove the heater core cover and seal from the A/C evaporator housing.
7. Lift the heater core and the heater core cover seals from the A/C evaporator housing.