Idle Speed & Ignition Timing: Notes

WARNING: This page is about a different car, the 1996 Mercury Villager. However, it is still accessible from the selected car via links, so may be relevant.

Ensure idle speed and ignition timing are set to specification. See appropriate table. For adjustment procedures, see the ADJUSTMENTS article.

NOTE: Always refer to Emission Control Label in engine compartment before attempting service. If manual and label differ, always use emission label specifications.

IDLE RPM SPECIFICATION

Application

RPM

Villager ⁽¹⁾

650-750

⁽¹⁾	Idle speed is computer controlled and not adjustable.

BASE IGNITION TIMING

Application

Degrees BTDC

Villager

⁽¹⁾ 15

⁽¹⁾	With IAC solenoid connector unplugged.