LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 1997 >> Villager LS >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Pinpoint Test D >> Pinpoint Test D4 >> Check Power Supply To ABS Control Module
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Check Power Supply To ABS Control Module

  1. With ignition switch in OFF position, connect breakout box with breakout box adapter to ABS control module connector. Leave ABS control module disconnected.
  2. With ignition switch ON, measure voltage on Light Green wire at breakout box pin No. 1. If reading is more than 10 volts, go to PINPOINT TEST D5  . If reading is less than 10 volts, service Light Green wire between interior fuse panel and ABS control module.
scientia non olet · About LEMON Manuals