LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 1999 >> Villager Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Removal & Installation >> Front Abs Sensor >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

  1. Disconnect negative battery cable. Disconnect engine wiring harness bulkhead connector and speed control vacuum supply hose, if removing right front ABS sensor only. Disconnect ABS sensor electrical connector in engine compartment.
  2. Raise and support vehicle. Remove ABS sensor cable and grommet through inner fenderwell. Remove ABS cable clamp bolts from frame. Remove remaining cable bolts, remove pin-type retainer and remove ABS sensor. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals