Driver's Side
NOTE:
Test specifications apply to both driver's power window control switch and driver's side passenger power window control switch. Both switches are located on driver's door arm rest.
Remove appropriate driver's side power window control switch harness connector(s). Check continuity between appropriate power window control switch terminals with power window control switch in specified position. See DRIVER'S POWER WINDOW CONTROL SWITCH CONTINUITY table. See Fig 1 . If continuity between terminals is not as specified, replace power window control switch.
DRIVER'S POWER WINDOW CONTROL SWITCH CONTINUITY
| Switch Position | Continuity Between Terminals No. |
|---|---|
| Down | 1 & 3; 2 & 7 |
| Off/Neutral | 1, 3 & 7 |
| Up | 1 & 2; 3 & 7 |