| Main Bearing Bore | Diameter | 68.905 mm 68.885 mm |
| Main Bearing Journal | Diameter | 63.983-64.003 mm |
| Out-of-Round Limit | 0.0003 in |
| Taper Limit | 0.06 mm Total 0.013 mm per 25 mm |
| Journal Runout Limit | 0.05 mm |
| Surface Finish (RMS) | 0.25 micrometers |
| Main Bearings | Clearance to Crankshaft - Desired | 0.025-0.035 mm |
| Clearance to Crankshaft - Allowable | 0.020-0.066 mm |
| Bearing Wall Thickness (1st and 2nd) | 2.444-2.481 mm |
| Bearing Wall Thickness (3rd and Rear) | 2.49-2.427 mm |
| Main Bearing Cap Bolts | Tighten the bolts in pairs | 80 Nm (59 ft.lb) |